Product range
Paper packaging products we manufacture
Five products, all converted at our own plant in Greater Noida. Four of them are kraft paper; the fifth is polyester strap that holds the other four together on the pallet.
Updated
MOQ 10,000 pcs 2-3 working days despatch Custom sizing from INR 2,00,000
01Core range
Start here
Edge protection
Paper Angle Board
Paper angle board is an L-profile kraft board that takes the compression load off your pallet corners. 3-12 ply, 30x30 mm to 100x100 mm,…
No ISPM-15 needed
Paper Pallet (Honeycomb)
We are a paper pallet manufacturer: a pallet made entirely from recycled kraft. No heat treatment, no fumigation, no IPPC stamp, no NPPO registration…
Winding cores
Paper Core Tube
We are a paper core tube manufacturer for textile, film, paper and foil rolls. Inner diameter, wall thickness and length are made to your…
Strapping
PET Strap
PET strap manufacturer and supplier of high-tensile polyester strapping for palletised and heavy loads - the safe replacement for steel strap, with retained tension…
02Angle board profiles
Pick the shape by the edge, not by the price
All five profiles are the same material and the same ply and thickness range. What changes is how the board meets your product.
Angle board variant
L Shape Edge Protector
An L shape edge protector is the standard 90-degree profile - two equal legs that sit on a pallet corner and carry the strap.…
Angle board variant
U Shape Edge Protector
A U shape edge protector is a channel profile that wraps a flat edge on three sides. Used where the thing being protected is…
Angle board variant
V Shape Angle Board
A V shape angle board is for edges that are not 90 degrees. The angle is set to your product, so the board sits…
Angle board variant
Wrap Around Edge Board
A wrap around edge board is one scored length that folds around the full perimeter instead of four separate corners. Notched, the same board…
Angle board variant
Self Adhesive Edge Board
A self adhesive edge board is pre-gummed on the inside faces, so it stays where it is placed without a separate tape step. Built…
03Scope
What we do not make — and why we say so
We manufacture paper angle board and its profiles, paper pallets, paper core tubes and PET strap. We do not make corrugated boxes, and we do not make wooden pallets, crates or plywood boxes.
That is worth stating plainly, because a lot of packaging websites list everything and buy in whatever they are asked for. There is nothing wrong with trading — but a buyer deserves to know which of the two they are talking to, because it changes who answers when a batch is not right. If you need something outside this list, tell us anyway. We would rather point you at the right supplier than take the order.
One more reason the list is short
Everything above except the strap is kraft paper. That means a unit load built from our products goes into a single recycling stream at the far end, and — for the pallet — sits outside ISPM-15 entirely, because that standard governs wood packaging material. A mixed timber-and-paper load gives you neither.
04Questions buyers ask
Questions about the product range
Paper angle board in the L profile, run the full stack height on all four corners, with PET strap over it. That is the default build and it covers most palletised freight.
Yes, and most customers do — board and strap on one order, cores on the same or a separate schedule. One supplier, one despatch, one invoice, with the two HSN codes listed separately on it.
10,000 pieces domestic applies per product line. If you are ordering across several sizes, that is usually reached on the mix rather than on any one size — ask us and we will tell you plainly.
Ask for one with your enquiry, and tell us the size and ply you want to see. A sample of the wrong grade tells you nothing useful.
Send us your load, not just your enquiry
Pallet size, stack height, monthly quantity and where it ships. That is enough for us to specify the board and quote it — usually the same working day.